Want To Choose The Best Fender Stratocaster Guitar Neck?

After writing t

his guitar neck post, I was more confused about guitar necks in general, but I still would get the same neck I use now.

The Fender Stratocaster is the type of guitar neck we narrowed it down to. Why, because the neck bolts on and obviously unbolts to come off. What differences can we expect when it comes to mounting a guitar neck? The two methods of preference are, #1. Glued on necks as in most Gibson Guitars and #2. Bolt On necks as in most Fender Guitars.

Is one method of installation better? Other than the ease of exchange and variety of necks for a Strat, most of the preference is personal in terms of what type of guitar you prefer to play.

Bolt on necks are easier to replace and therefore easier to talk about. Fender Strats have bolt on necks. Using four bolts to secure the neck into the CNC (computer numerically controlled) or machined by a super accurate computerized tool, and then perfectly bolts to the body with four bolts as mentioned above. That sounds easy enough, that is if you go back with a stock replacement neck.
Simple enough, right? Now we can get dirty deep into Strat neck(ology). You want a custom neck, or something that fits your hands better? Now is your chance to get the perfect fit, for you and the guitar.

The array of woods available is surprising and interesting. Both in terms of type of wood and cost. The shapes or curvature of the back of the neck includes six to nine styles, at least for a Stratocaster. Wide and deep for giant hands (SRV had giant hands), check out the “boatneck”. Or a narrow V-neck such as the Eric Clapton Strat, for for others hand sizes as well. Size and contour has a lot to do with your music style, particularly if you play (farmers chords) which is where you are playing a barre chord, but using your thumb on the low E string.

Then you must consider fret sizes. Ranging from narrow frets to huge super jumbo frets, which are my preference. Of less importance is the type of fret wire available. I definitely prefer standard wire, which is actually the same material as guitar string wire over the softer stainless steel or gold color fret wire.

Remember to choose a hand carved bone nut. Bone is the most irresistible material nuts can be made from. Read more.

Warmouth is one of the best guitar-resources who explains the Anatomy of a Neck and some of the custom choices available including: the Binding, Conversion Necks, Finishes, Fret-board Extensions, Fret-board Radius, Heel Width & Mounting, Inlay/Custom Inlay, Neck Woods. Peg-head Veneer, Scalloping, Side Adjust Mechanism, Truss Rods and Tuner Holes better than Warmoth Direct.

The difference you can make in personalization, playability, comfort and sound is worth it, when you get a rare opportunity to change your neck. One of the coolest changes you can make is to go to a reverse headstock. It changes the sound and playability of the instrument since you the string lengths are backwards from a stock Strat.

Enjoy, read, and you be the judge.

Note: When looking for a replacement guitar neck, make sure the style of neck you are looking for will fit the guitar body you plan on attaching the neck too. Don’t be bashful, do a lot of research by emailing or phoning the company to get the feedback you need to have when replacing your neck.

Guitar Players Center provides solid real world info on Guitars and Guitar -Articles. This information presented is well researched and accurate. For a continuous flow of guitars and related information please get a free subscription to our newsletter. Email is all we need. No names or addresses.

If the information is useful, please take advantage of using the Share It feature. Not only will that expose lots of people to this information, but it may be in your best interests, and you may find a lot more interesting articles on many subjects that interest you as well. GPC.